I'm pretty sure what you're describing is the rear one so you found it. They are a reverse TORX, same as the end of the tip-in screw. I can't find any pics showing the adjusters but i guarantee you 100% that there are adjuster screws accessible when you remove the 2 plugs on the bottom of the door. OK, Ignore the posters telling you to pull the door apart.
#C5 WINDOW HEIGHT ADJUSTMENT C5 PATCH#
Took the carpet patch that has the rear light in it out, loosened the 3 bolts and moved the latch catch just a little upwards and tightened. It was the loudest noise made by the car and finally i found that the right side 'latch catch' (best name i could think of) was adjusted so it made the trunk too tight when closed. Anyone have pics that could help me out? BTW: I fixed the creaking sound in the rear trunk area. At the front there is nothing at all, not under the smaller plug anyway. At the rear plug with the window down i do see a small (maybe) 6mm hexagon screw that's connected to the glass assembly. The problem is i see no 18mm screw to do this under either the small plug at the front of the door nor the rear plug. The tip-in was super easy but after 4 counter clockwise turns it still has some noise so i would like to raise the window just a slight amount.
#C5 WINDOW HEIGHT ADJUSTMENT C5 DRIVERS#
I have some wind noise on my drivers side and read thru the tip-in and height adjustment instructions.
0 kommentar(er)
